A remote light switch can
add to the convenience of your home. You won’t have to jump up to turn a light
off or on. For hard to reach switches, this is a good solution.
Installation Remote Switch
1)
Switch off the main Power supply.
2)
Open the switch board.
3)
Locate Phase/Line wire and connect Red wire
of the sensor unit to it.
4)
Locate Neutral point (Normally exists near
plug point) and connect black wire to it.
5)
Connect all yellow wires to the light
switches as show in Diagram.
6)
Do now remove existing wires from any of
the switch.
7)
Connect blue (Violet) Wire to fan switch
and rotate manual fan regulator to Maximum position.
8)
Close the switch board by trucking /
pushing all wires of the sensor inside the board and keep Only the sensor out side the switch board.
9)
A self-adhesive sticker on back of the
sensor unit makes it fix to the wall firmly.
10)
Insert 2 AA Size Batteries Inside the
remote control and enjoy the operation of lights and fan using remote within 43
feet/ 14 meters distance.
1)
Black wire Input
2) Red
wire 230V AC
3) Yellow
wire Light
4) Yellow
wire Light
5) Yellow
wire Light
6) Blue
wire Fan
Note:
1) For
safety turned off the main power supply while installation this equipment.
2) This
equipment is used as mentioned purpose only .
3) In
2 way switch connect only one switch Remove other switch.
 |
| Blackt Electrotech Unit |
 |
| Connection to Switch Board |
 |
| Module on Wall |
Mfg By : Blackt Electrotech
Amravati, India
Mb: +91- 965 7707702
Fallows us on Facebook
.
