How to Install Wireless Remote Control/Switches for Lights and Fan

  

        A remote light switch can add to the convenience of your home. You won’t have to jump up to turn a light off or on. For hard to reach switches, this is a good solution.

                                          Installation Remote Switch

1)    Switch off the main Power supply.

2)    Open the switch board.

3)    Locate Phase/Line wire and connect Red wire of the sensor unit to it.

4)    Locate Neutral point (Normally exists near plug point) and connect black wire to it.

5)    Connect all yellow wires to the light switches as show in Diagram.

6)    Do now remove existing wires from any of the switch.

7)    Connect blue (Violet) Wire to fan switch and rotate manual fan regulator to Maximum position.

8)    Close the switch board by trucking / pushing all wires of the sensor inside the board and keep  Only the sensor out side the switch board.

9)    A self-adhesive sticker on back of the sensor unit makes it fix to the wall firmly.

10)                      Insert 2 AA Size Batteries Inside the remote control and enjoy the operation of lights and fan using remote within 43 feet/ 14 meters distance.

1)   Black wire                  Input

2)    Red wire                     230V AC

3)    Yellow wire Light

4)    Yellow wire Light

5)    Yellow wire Light

6)    Blue wire Fan

Note:                                                               

1)    For safety turned off the main power supply while installation this equipment.

2)    This equipment is used as mentioned purpose only .

3)    In 2 way switch connect only one switch Remove other switch.

                                                                                                                                                                           

Blackt Electrotech Unit

       

Connection to Switch Board

Module on Wall

Mfg By : Blackt Electrotech
Amravati, India
Mb: +91- 965 7707702

Fallows us on Facebook 

.